In-Furnace Rotary Flux Injector
Introduction
Purpose
The HO-2000 in-furnace rotary flux Injector is primarily used for degassing and refining molten aluminium in melting and holding furnaces. Compared with artificial pipe refining method, it can reduce labor intensity and ensure the refining effect. Through automated operation, the equipment effectively removes hydrogen and inclusions from the molten aluminum, improving the physical properties and machinability of castings. It is an essential refining device for achieving high-quality molten aluminium refining.
Refining Principle
Hydrogen has high solubility in molten aluminum. If not removed in time, it will significantly affect the performance of the castings. The equipment uses a high-strength rotating rotor to evenly disperse inert gas into fine bubbles, which are evenly dispersed and buoyed in the molten aluminum. Since the hydrogen partial pressure in the aluminum liquid is higher than in the bubbles, and the hydrogen will diffuse into the inert gas and float up to the liquid surface with the bubbles, thereby effectively reducing the hydrogen amount in aluminum liquid. At the same time, the floating air bubbles will bring the fine inclusions in the molten aluminum to the surface of the molten aluminum, which will be captured and removed by the covering agent.
Equipment Components
Mobile car
Moving box traveling mechanism
Rotor tilting system
Rotor rotation system
Rotating mechanism swing system
Powder spraying device
Bench
Control system
Graphite rotor, graphite shaftControl system
Main components
▶Refining efficiency increased by 20%, processing more molten aluminum per unit time.
▶ Refining flux usage reduced by 20%, saving production costs.
▶ Reduced temperature loss, saving gas costs by 1-2 m³ of natural gas per ton of aluminum.
▶ Reduced oxidation and burning losses by 40%, improving utilization.
▶ Labor savings of up to 95%, achieving nearly fully automated operation.
▶ Stable and consistent refining results with minimal variability between furnaces.
▶ One machine can serve two furnaces, increasing equipment utilization.
▶ Compact structure, smooth movement, and adaptability to high-temperature and dusty environments.
Technical Parameters
|
Item |
Parameters |
Remark |
||
|
Refining gas |
Purity % |
≥99.996 |
High-purity nitrogen or argon |
|
|
|
Pressure MPa |
0.1-0.6 adjustable |
|
|
|
|
Flow m³/h |
6～26 adjustable |
|
|
|
Rotor tilting range (mm) |
0~32° |
|||
|
Rotor speed (r/min) |
100－400 |
Frequency conversion adjustable |
||
|
Refining time (min) |
0～99 |
Time adjustable |
||
|
Molten aluminium temperature ℃ |
640-850 |
Temperature for refining aluminium |
||
In-Furnace Rotary Flux Injector
Leave Your Message